Estimation of Genetic Parameters of Variability for Yield and Yield-Related Traits in Maize (Zea mays L.) Hybrids
Abstract
Maize (Zea mays L.; 2n = 20) is a monoecious, cross-pollinated crop with wide scope for the development of hybrids and composites. Composites occupy a major area in India but are poor yielders. Therefore, considering the importance of recently developed single-cross hybrids through superior inbreds, there is a need to promote them. Thus, there is tremendous scope for increasing production and productivity. However, for any breeding programme, germplasm serves as a valuable source material as it provides scope for building genetic variability. Among a series of routine activities in a breeding programme, selection (the effectiveness of which is determined by the selection criteria used) is the most important step for obtaining high-yielding genotypes. Information on genetic parameters such as heritability can be used as a consideration to determine selection criteria. The field experiments were laid out in a randomized block design with three replications and thirty hybrids at IARI-Sipani Krishi Anusandhan Farm, Collaborative Outstation Research Centre, Sitamahu Road, Changli, Mandsaur (M.P.), India. The crop was raised during Kharif 2022–23. Five competitive plants were randomly selected from each replication in a genotype for recording observations on thirteen quantitative characters, viz., days to 50% tasseling, days to 50% silking, plant height, ear height, cob length, cob girth (cob diameter), number of kernel rows per cob, 100-grain weight per cob after shelling, 100-grain weight, number of plant stand per plot, kernel texture (flint/dent), grain yield per plot (kg), and days to maturity (days). The mean squares from the analysis of variance revealed that the mean squares due to genotypes were highly significant for all the characters, indicating the presence of significant genetic variability in the material under study. This provides scope for selection and further subsequent utility of the genotype in the crop improvement programme. High GCV was recorded for grain yield per plot (32.59%), number of plant stand per plot (17.27%), ear height (13.99%), test weight (11.68%), and number of kernel rows per cob (10.90%). Therefore, selection for all these characters would be effective. Heritability (broad sense) estimates were high (>50%) for all the traits except days to maturity (47.36%). Heritability in the broad sense of more than 80% was recorded for plant height, ear height, cob length, number of kernel rows per cob, test weight, number of plant stand per plot, and grain yield per plot. High genetic advance as a percentage of mean (genetic gain), along with estimates of heritability and GCV, was observed for ear height, cob length, number of kernel rows per cob, test weight, number of plant stand per plot, and grain yield per plot, which shows additive gene effects on these characters. Therefore, it appeared from the present study that characters like test weight, ear height, cob length, and number of kernel rows per cob exhibit a predominance of additive gene effects. Hence, simple selection based on phenotypic observations would be effective for these characters to bring genetic improvement in the desired direction.
Keywords
Download Options
Introduction
Maize (Zea mays L.; 2n = 20) is a monoecious, cross-pollinated C4 plant belonging to the tribe Maydeae of the grass family Poaceae (Matin et al., 2017). The plant is native to South America. Zea mays is the only species in the genus Zea with chromosome number 2n = 20 (Sharma et al., 2014). It is cultivated under a very diverse agro-climatic zone that extends from tropical and subtropical to cold climates (Muliadi et al., 2021). The suitability of maize to diverse environments is unmatched by any other crop, as the expansion of maize to new areas and environments still continues, as it has a range of plasticity. Maize plays an important role in human and livestock nutrition worldwide. Maize (Zea mays L.) is the third most important staple cereal crop in the world after wheat and rice and is the primary staple food in many developing countries (Matin et al., 2017; Erenstein et al., 2022).
Maize, being a cross-pollinated crop, has wide scope for the development of hybrids and composites. In recent years, there has been a perceptible improvement in maize production in India, but the production and productivity of India are much less when compared to countries like the USA. The United States produces almost half of the world's production; other top producing countries are China, Brazil, France, Indonesia, and South Africa. India ranks fourth in maize production, producing 31.51 million tonnes on an area of 9.9 million hectares in 2020–21, whereas in Kharif 2021–22, maize production was 21.24 million tonnes (1st advance estimates) in an area of 8.15 million hectares (MoA&FW, New Delhi; https://agricoop.nic.in). It is mainly grown in Uttar Pradesh, Bihar, Rajasthan, and Madhya Pradesh because of high yield, the ease with which the crop can be cultivated, and the stability of prices. The disparity in average yields at global and national levels is a consequence of environmental, technological, and organizational factors. The productivity of maize in Madhya Pradesh is approximately 20 q/ha, which is less than the national average. Composites occupy a major area in India, but these are poor yielders. Therefore, considering the importance of maize in the state's economy, the study was proposed. Recently, single-cross hybrids developed through superior inbreds need to be promoted. Thus, there is tremendous scope for increasing production and productivity. However, for any breeding programme, germplasm serves as a valuable source material as it provides scope for building genetic variability.
Among a series of routine activities in the breeding programme, selection is the most important step for obtaining high-yielding genotypes. The effectiveness of selection is determined by the selection criteria used. Determining selection criteria can be done in various ways. Information on genetic parameters such as heritability can be used as a consideration to determine selection criteria.
Thus, the present investigation was undertaken with the aim to characterize Zea mays L. genotypes at the morphological level with the objective to estimate the genetic parameters of variability for yield and yield-related traits in maize hybrids.
Conclusion
The analysis of variance revealed the presence of significant genetic variability among the genotypes for all eleven characters. Furthermore, the mean and median values for various characters being quite close to their respective values indicates the normal distribution of the genotypes. Estimates of genetic variability parameters showed that the phenotypic coefficient of variation (PCV) was higher than the respective genotypic coefficient of variation (GCV). High GCV was recorded for grain yield per plot, number of plant stand per plot, ear height, test weight, and number of kernel rows per cob. Therefore, selection for all these characters would be effective.
References
- Ahmad, S. Q., Saleem, K. M. G., & Farhad, A. (2011). Genetic diversity analysis for yield and other parameters in maize (Zea mays L.) genotypes. Asian Journal of Agricultural Sciences, *3*(5), 385-388.
- Ali, W., Rehman, H. U., Ahmad, K., Munir, I., & Khan, A. (2007). Genetic variability among maize hybrids for yield and yield components. Sarhad Journal of Agriculture, *23*(1), 75-79.
- Burton, G. W. (1952). Quantitative inheritance in grasses. In Proceedings of the 6th International Grassland Congress (Vol. 1, pp. 227-283).
- Bello, O. B., Ige, S. A., Azeez, M. A., Afolabi, M. S., Abdulmaliq, S. Y., & Mahamood, J. (2012). Heritability and genetic advance for grain yield and its component characters in maize (Zea mays L.). International Journal of Plant Research, *2*(5), 138-145.
- Begna, T., Gichile, H., & Yali, W. (2022). Genetic diversity and its impact in enhancement of crop plants. Global Journal of Agricultural Research, *10*(2), 13-25.
- Erenstein, O., Jaleta, M., Sonder, K., Mottaleb, K., & Prasanna, B. M. (2022). Global maize production, consumption and trade: Trends and R&D implications. Food Security, *14*, 1295-1319.
- Johanson, H. W., Robinson, H. F., & Comstock, R. E. (1955). Estimation of genetic and environmental variability in soyabean. Agronomy Journal, *45*, 314-318.
- Kabdal, M. K., Verma, S. S., Ahmad, N., & Panwar, U. B. S. (2003). Genetic variability and correlation studies of yield and its attributing characters in maize (Zea mays L.). Agricultural Science Digest, *23*(2), 137-139.
- Matin, M. Q. I., Uddin, M. S., Rohman, M. M., Amiruzzaman, M., Azad, A. K., & Banik, B. R. (2017). Genetic variability and path analysis studies in hybrid maize (Zea mays L.). American Journal of Plant Sciences, *8*, 3101-3109.
- Mahmood, Z., Malik, S. R., Akhtar, R., & Rafique, T. (2004). Heritability and genetic advance estimates from maize genotypes in Shishi Lusht a valley of Krakurm. International Journal of Agriculture & Biology, *6*(5), 790-791.
- Muliadi, A., Effendi, R., & Azrai, M. (2021). Genetic variability, heritability and yield components of water logging-tolerant hybrid maize. Earth and Environmental Science, *648*, 1-9.
- Panse, V. G., & Sukhatme, P. V. (1985). Statistical methods for agricultural workers. Indian Council of Agricultural Research.
- Salgotra, R. K., & Chauhan, B. S. (2023). Genetic diversity, conservation and utilization of plant genetic resources. Genes, *14*(1), 174. https://doi.org/10.3390/genes1401074
- Sharma, R., Maloo, S., & Joshi, A. (2014). Research note: Genetic variability analysis in diverse maize genotypes (Zea mays L.). Electronic Journal of Plant Breeding, 5(3):545-551.
- Sesay, S., Ojo, D. K., Ariyo, O. J., & Meseka, S. (2016). Genetic variability, heritability and genetic advance studies in top-cross and three-way cross maize (Zea mays L.) hybrids. Maydica, *61*, 1-7.
- Sharma, D., Joshi, A., Jain, D., Sharma, P., & Rajoriya, S. K. (2018). Studies on intra-species genetic divergence in Triticum spp. in western Rajasthan. Chemical Science Review and Letters, *7*(28), 886-891.
- Shrestha, J., Subedi, S., Acharya, R., Sharma, S., & Subedi, M. (2021). Variability for growth and yield traits in single cross hybrids of maize (Zea mays L.). Journal of Agricultural Science, *2*, 319-327.
- Sumathi, P., Nirmalakumari, A., & Mohanraj, K. (2005). Genetic variability and traits interrelationship studies in industrially utilized oil rich CIMMYT lines of maize (Zea mays L.). Madras Agricultural Journal, *92*(10-12), 612-617.
- Turi, N. A., Shah, S. S., Ali, S., Rahman, H., Ali, T., & Sajjad, M. (2007). Genetic variability for yield parameters in maize (Zea mays) genotypes. Journal of Agricultural and Biological Science, 1990-6145.